A Manufacturer of Industrial Machines, Systems, and Plants for Advanced Composites, Building Products, and Pulp & Paper
Drop Down Pans
The glue pan on original Globe glue spreaders was difficult to access for maintenance and cleaning.
The swing-down design enables easier access for your crew, and the ability to get old glue out of every nook and cranny. This option is standard on new machines, and can be retrofitted to older style Globe glue spreaders.
The Globe Tankless option is available for spreaders where foam-type glues will be used. The spreaders have been adapted to prevent glue from entering the area between the frame and the rollers, allowing for less maintenance and easier clean-up.
At Globe Machine, every system is customized to the customer's needs. In this example, a customized delivery tray was designed to work with the glue spreader. The tray drops down for easy maintenance after use.
If your existing machine has "good bones," it is sometimes more economical to consider refurbishing rather than replacing. Worn parts can be replaced, rust can be removed allowing for a new paint job. This is the time to decide if you want to retrofit to newer features.
Globe Glue Spreaders are preferred by companies who expect quality while obtaining even and measured glue spread.
More than 800 Globe Glue Spreaders are in service.
Globe Glue Spreaders have proven to be successful in spreading top, bottom, or both sides of veneer in varying thicknesses over rough peel and “thick and thin”. The Globe Spreader is adaptable for use in any lay-up line and has reduced glue line costs and glue waste.
Features & Options
Glue Roll Bearings
Bottom Glue Roll
© 2018 Globe Machine Manufacturing Company
Comments? Send mail to